Custody transfer metering systems for H2

Metering solution for hydrogen

  • Excellent measurement of pure hydrogen and hydrogen/natural gas mixtures
  • Accuracy even at low operating density
  • Self-diagnostic for optimal system performance

Custody transfer metering systems for H2

Metering solution for hydrogen

  • Excellent measurement of pure hydrogen and hydrogen/natural gas mixtures
  • Accuracy even at low operating density
  • Self-diagnostic for optimal system performance

Overview

KROHNE metering systems are used throughout the entire energy value chain, from production, through ship (un)loading and pipeline transport, to industrial consumers or underground storage locations. KROHNE takes full project responsibility for the system, including metering skids, analysers, and flow computers integrated into the metering control cabinet, with all supervisory and validation software.

As a result of the production process and foreseen application, hydrogen as a fuel gas comes with different properties and requirements. Depending on the production method, the hydrogen may contain impurities such as H2O, O2, CO2, CO or CH4. Subject to the application, KROHNE will design and manufacture metering solutions to suite these requirements. This implies mechanical and electrical design considerations, but also dedicated impurity analysers and CT flow computations certified for hydrogen. KROHNE metering systems are often designed as a master-duty configuration, where a Z-cross over allows periodical verification of the duty meters against the master meter. In addition, diagnostic features of the flowmeters are used to guarantee maximum performance and lowest measurement uncertainty.

Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.

  • Based on ultrasonic, Coriolis or turbine flowmeters
  • Low pressure loss
  • SUMMIT 8800 flow computation certified for hydrogen custody transfer
  • Comprising flow metering skid, flow control, metering control cabinets, ampling and analyser systems, including all supervisory and validation software
  • Compliance with international and local standards e.g. OIML R137, MI-002
  • Single source responsibility for metering and analyser system
  • Covering the initial design phase through to on-site commissioning and training

Related products

OPTIMASS 6400

Coriolis mass flowmeter for advanced process applications

  • High accuracy (±0.05% flat), for cryogenic to high temperature media (-200…+400°C / -328…+752°F); maintains operation over a wide range of gas fractions and complex flow conditions (EGMTM)
  • SIL 2/3; CT: OIML R117, R137, MI-005, MI-002; API, AGA; hygienic certifications
  • Flange: DN10…300 / ½…12", max. PN 160 / ASME Cl 1500
  • 3 x 4…20 mA, HART®7, Modbus, FF, Profibus-PA/DP, PROFINET, EtherNet/IP™, Bluetooth®

OPTIMASS 2400

Coriolis mass flowmeter for highest capacity bulk measurement

  • For gases and liquids up to 4,600 t/h; maintains operation over a wide range of gas fractions and complex flow conditions (EGMTM)
  • CT: OIML R117, MI-005, MI-002; API and AGA compliant
  • Flange: DN100…400 / 4…16", max. PN160 / ASME Cl 1500
  • 3 x 4…20 mA, HART®7, Modbus, FF, Profibus-PA/DP, PROFINET, EtherNet/IP™, Bluetooth®

ALTOSONIC V12

Ultrasonic flowmeter for custody transfer (CT) measurement of gases

  • 12-chord meter, for high accuracy flow metering of natural gas
  • CT: OIML R137 (class 0.5), MI-002, AGA9 etc.
  • Many variants, extensive CBM diagnostics free of charge
  • Flange: DN100…1600 / 4…64"; max. PN450 / ASME Cl 2500

SUMMIT 8800

Flow computer for custody transfer (CT) measurement

  • Cost effective solution due to modular hard- and software design
  • Full colour graphical touch screen for maximum process transparency
  • Easy operator access enabling time efficient maintenance
  • Automatic Performance Monitoring extends recalibration interval

Related solutions

Supervisory control cabinets

Complete solution for process control

  • Provides control of the metering system, including validation of field instrumentation
  • Installed in a safe area, typically in a control room or dedicated building
  • Supplied in combination with new metering systems, or for an upgrade to existing systems

Modular flow control and data transfer cabinets

Basic flow control solution

  • Cost effective, modular metering control solution
  • Based on the SUMMIT 8800 flow computer
  • Installed in a safe area, typically in a control room

Flow computing

Flow computer solution for the visualisation of measurements

  • Graphical representation of all measurements
  • Fully pre-configured and tested according to customer requirements
  • Different liquid and gas streams measured and displayed on a single flow computer

Metering houses and shelters

Turnkey housing solution for the installation of electronic systems and cabinets on-site

  • A safe area for the installation of electronic equipment and cabinets
  • Integrated HVAC system where required
  • Local operator supervisory work station can be included

Sampling systems

Automatic sampling solution for liquid hydrocarbons

  • Sampling systems for stand-alone use, or integrated into the flow metering systems
  • In-house design, manufacturing, commissioning and testing
  • Fully assembled and tested prior to shipping
  • Engineered solution to meet any special project specifications

Analyser houses and shelters

Analyser solution for crude oil, refined products and natural gas

  • Quality measurements of crude oil, refined products and natural gas
  • Supplied with new metering systems, or as a stand-alone upgrade to existing systems
  • Engineered solutions based on customer preferred brands

Ball provers

Standalone or fully integrated prover solution

  • Engineered solutions optimised for the customer processes
  • Stand alone or integrated into the metering skid
  • Uni- and bi-directional, with diameters from 3" to 36"

Mobile provers

On-site master metering solution

  • On-site meter verification against a mobile master meter
  • Cost effective solution due to sharing between different locations
  • Lowest measurement uncertainty by periodic verification of prover against national and international standards
  • Engineered prover solution optimised for specific applications

Calibration runs and skids

Calibration solution for liquids and gases

  • Comparable systems to those used during the manufacture of KROHNE flowmeters
  • Flexible concept, with a design tailored to the requested application range of the flow control
  • Available with calibration in accordance with national and international standards

SynEnergy Supervisory and visualisation software

Solution for continuous process monitoring and reporting

  • HMI/SCADA software for measurement solutions
  • State of the art HTML5 secure web technology
  • Optimisation of operation results due to predictive maintenance
  • Easy integration into existing DCS and ERP networks

CalSys Analyser Management software

Solution for analyser management and data acquisition (AMADAS)

  • Effective performance monitoring of quality measurement instruments (QMI)
  • Automated analyser validation, statistical process control and increased availability of critical process analysers
  • Complies with international standards and methods (ASTM D3764, ASTM D6299, OP 97-30425 etc.)
  • Versatile accessibility via remote system access
Email
Contact