OPTIBAR FC 1000

Flow computer for process control of liquids, gases and steam

  • High performance flow and energy calculation with DP flow elements, volumetric or mass flowmeters
  • Compact design, quick and easy-to-operate via TFT touch screen
  • Enables split-range operation with two pressure transmitters for increased measuring dynamics
  • HART® communication with all common DP transmitters for loss-free measured data transmission and possibility of automatic zero point adjustment
New

OPTIBAR FC 1000

Flow computer for process control of liquids, gases and steam

  • High performance flow and energy calculation with DP flow elements, volumetric or mass flowmeters
  • Compact design, quick and easy-to-operate via TFT touch screen
  • Enables split-range operation with two pressure transmitters for increased measuring dynamics
  • HART® communication with all common DP transmitters for loss-free measured data transmission and possibility of automatic zero point adjustment

Overview

The OPTIBAR FC 1000 is a compact, high performance flow computer for volumetric flow calculation and heat quantity measurement of liquids and gases, including saturated steam and superheated steam. Commissioning and operation of the flow computer is quick and easy thanks to its user-friendly operating philosophy. The full-screen, multi-colour touch screen offers extensive options for customising the display of process readings to suit any customer applications. Communication and measured data transmission via HART® protocol as well as the option for split-range operation allows very accurate differential pressure (DP) flow measurements especially at low working pressures. This makes the device an ideal enhancement for gas measurements with averaging pitot tubes as well as flow nozzle meters or Venturi meters with high measuring dynamics.

Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.

  • User interface can be customised to suit specific application requirements
  • Supports split-range operation and automatic zero calibration
  • High system capacity with correction calculation according to the following equations of state:
    • Ideal gas, Redlich-Kwong, Redlich-Kwong-Soave, Peng-Robinson, AGA-8 DC/GC, SGERG 88, AGA-NX19 (gases), IAPWS-97 (water, steam) and value tables (liquids, heat transfer media)
  • Digital communication to connected pressure transmitters via HART® protocol
  • Integrated FSK-modem for 2 analogue inputs: makes parameterisation easy and eliminates additional sources of uncertainty in the signal exchange
  • User-friendly configuration via online configuration tool
  • Available as a panel-mount version for control cabinets and as a versatile wall-mounted version

Related products

Compact orifice plate flowmeter

Integral DP flowmeter for liquids, gases and steam

  • Fast and easy installation without additional engineering, impulse lines and supports
  • Up to +400°C / +752°F; max. 160 bar / 2320 psi (line pressure)
  • Line size: DN50…600 / 2…24"
  • 2-wire 4…20 mA/HART®, FF, Profibus-PA
View product details

Integral orifice meter run assembly

DP flowmeter for process applications with small line sizes (down to DN15 / ½")

  • Standardised calibrated meter run assembly, designed acc. to ISO 5167 or ISO TR 15377
  • Up to +400°C / +752°F; max. 160 bar / 2320 psi (line pressure)
  • Flange: DN15…100 / ½...4"
  • 2-wire, 4…20 mA/HART®, FF, Profibus-PA
View product details

Averaging pitot tube flowmeter

DP flowmeter for applications with liquids, gases and steam to high-temperature applications with dust-laden gases

  • Fast and easy installation without additional engineering, impulse lines and supports; the best retrofit capability
  • -200…+1150°C / -328…2102°F; max. 320 bar / 4641.2 psi (line pressure)
  • For line sizes DN50…2000 / 2…80" (larger on request)
  • 2-wire 4…20 mA/HART®, FF, Profibus-PA
View product details

Venturi flowmeter

DP flowmeter for the highest requirements of accuracy and long-term stability

  • For acceptance testing, billing, reference measurement of steam, feedwater, hydrocarbons etc.
  • Machined or welded and internally machined design acc. to EN ISO 5167 and ASME MFC-3M; low remaining pressure loss
  • Manufacturing capability up to 48”; inhouse calibration also for applications with high Reynolds numbers
  • Complete scope of supply from one source, incl. engineering, documentation, testing, calibration, valves, Venturi, process instrumentation, etc.
View product details

Flow nozzle meter

DP flowmeter for long-term stable flow measurement with reduced pressure loss

  • Based on ISA 1932, long radius or Venturi nozzle (acc. to ISO 5167-3 or ASME MFC-3M)
  • Accurate flow measurement at high flow velocities (e.g. feed water, steam, condensate, hydrocarbons, refined products, CO2, LH2)
  • Manufacturing capability up to 48”; inhouse calibration also for applications with high Reynolds numbers
  • Complete scope of supply from one source, incl. engineering, documentation, testing, calibration, valves, flow nozzle, process instrumentation, etc.
View product details

Cone flowmeter

DP flowmeter for limited installation space

  • Only limited straight inlet/outlet pipe sections required
  • Standard material: stainless steel, other materials on request (e.g. Alloy C276, Alloy 625, Alloy 400, Duplex, etc.)
  • Standard (ISO 5167-5) sizes from DN50…600 / 2…20"
  • 2-wire 4…20 mA/HART®, FF, Profibus-PA
View product details
Email
Contact