Flexible flow measurement, no process interruption
Application Note | Water & Wastewater
- Automatic leak monitoring of water consumption overnight
- Easy to install from outside without interrupting the process
- On-site data storage and reading
A Swiss water supply company wanted simple flowmeters to monitor for leaks in the pipelines that lead to the end consumers. Some of these lines are very old cast iron pipes, which makes it extremely costly to install modern flowmeters. For this reason, the only flowmeters that were considered for these applications were the ones that could be installed from outside without interrupting the process.
Flow measurements must start automatically at 1 a.m. and stop at 6 a.m. Since consumption during this period is normally minimal, errors such as ones caused by leaks are easily detected. The total flow during the night is counted and this total is then saved. During the day, the counters can be read easily and then compared to the readings taken on previous nights.
For these applications, KROHNE supplied the OPTISONIC 6300 W ultrasonic measuring device and the micromec® data logger. The rails and sensors are installed on the pipelines from the outside. The sensors are easy to position on the tracks using the easy-to-operate converter installation program. The micromec® data loggers automatically control the measurements. In other words, the beginning and end of the measurements and the recording of the flow measurements. micromec® measures the current flow via the current output of the UFC 300 W converter and the volume for the specified time period via the pulse output. Because they are so easy to install, these measuring devices can easily be used to check other pipelines.
It is now very easy to monitor main lines to end consumers for leaks. The investment and follow-up costs for this measuring equipment are very low. The systems are maintenance-free and can easily be used for other pipelines.