Automated filling of a collecting machine on a coke oven
Application Note | Metal & Mining
- Continuous non-contact level measurement during filling operation
- Tracks rapid changes in level to ensure that bunkers are consistently filled
A large metallurgical plant in Duisburg produces millions of tonnes of steel every year. The company operates a coke oven battery whose ovens are filled from above using a machine. The machine has four collecting hoppers and always fills four ovens simultaneously.
At the end of each filling operation, the machine's collecting hoppers must be filled up again. To do this it runs under a platform with four coal ramps. To automate the process and to guarantee a constant rate of filling of the ovens with the same amount of coke, the level in the collecting hoppers is measured while the machine is being loaded.
In the past, guided radar devices installed inside the collecting hoppers have been used for level measurement. Since the cable probes in the tanks always broke during loading and had to be repaired at great cost, the operator was looking for a non-contact solution.
For this application, four non-contact OPTIWAVE 6300 C radar level meters were installed on the loading platform. The meters measure the content of the machine's approx. 4 m high, cone-shaped collecting hopper during loading. They are equipped with DN 80 PP drop antennas.
The challenge with this application is that as soon as the machine stops under the platform, the measuring devices must detect a signifi cant change in "level" or the distance to the surface within seconds. The subsequent fi lling of the machine also takes place very quickly (in less than a minute). Since changes in height of more than a few metres in such a short time are not typical for level applications, KROHNE modifi ed the device software to give a faster response.
After a few tests, the customer was very satisfi ed with the new solution: non-contact measurement meant it was now possible to install the devices on the platform. As a result, the devices cannot be damaged by the product and guarantee uninterrupted operation.
Despite the short fi lling time, OPTIWAVE devices provide reliable and stable measurements. Strong signal bundling of the drop antennas ensures reliable measurement even if dust forms during the fi lling operation.